page 1 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. rohs compliant j102 15.5 x 10.5 x 11.25 mm contact data* features e197851 general data* ? high sensitivity ? super light weight ? low coil power consumption ? pc board mounting ? ideal for high density mounting contact arrangement 1a = spst n.o. 1b = spst n.c. 1c = spdt contact resistance < 50 milliohms initial contact material agni + au, ag + au maximum switching power 150w maximum switching voltage 300vac, 150vdc maximum switching current 5a coil data* electrical life @ rated load 100k cycles, average mechanical life 10m cycles, average insulation resistance 100m min. @ 500vdc initial dielectric strength, coil to contact 1250v rms min. @ sea level initial contact to contact 500v rms min. @ sea level initial shock resistance 100m/s 2 for 11 ms vibration resistance 1.50mm double amplitude 10~40hz terminal (copper alloy) strength 5n operating temperature -40 o c to +85 o c storage temperature -40 o c to +155 o c solderability 260 o c for 5 s weight 3.5g contact rating agni 3a & 5a @125vac, general use, 20k cycles for n.o., 10k cycles f or n.c. 3a & 5a @ 30vdc, resistive use, 50k cycles for n.o., 30k cycles for n.c. ag 1a & 3a @125vac, general use 1a & 3a @ 30vdc, resistive use pilot duty 270va, 120vac, n.o., 30k cycles pilot duty 270va, 120vac, n.c., 6k cycles a t u r e s * values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. it is recommended to test actual load conditions for the applica- tion. it is the user?s responsibility to determine the performance suitability for their speci c application. the use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. coil voltage vdc coil resistance +/- 10% pick up voltage vdc (max) 75% of rated voltage release voltage vdc (min) 10% of rated voltage coil power w operate time ms release time ms rated max .20w .36w .45w 3 3.9 45 25 20 2.25 .3 .20 .36 .45 55 5 6.5 125 75 56 3.75 .5 6 7.8 180 100 800 4.50 .6 9 11.7 405 225 180 6.75 .9 12 15.6 720 400 320 9.00 1.2 24 31.2 2880 1600 1280 18.00 2.4
www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. j102 page 2 dimensions units = mm 15.54 [.61] 10.58 [.42] 11.60 [.46] 3.45 typ [.14] 10.16 [.40] 2.54 [.10] 7.62 [.30] ordering information 1. series j102 1c s 3 12vdc .45 j102 j102k 2. contact arrangement 1a = spst n.o. 1b = spst n.c. 1c = spdt 3. sealing options s = sealed 4. contact options 1 = 1amp ag (requires .2, .36 or .45 watt coil) 3 = 3amp agni (requires .2, .36 or .45 watt coil) 3p = 3amp ag (requires .2, .36 or .45 watt coil) 5 = 5amp agni (requires .45 watt coil) 5. coil voltage 3vdc 5vdc 6vdc 9vdc 12vdc 24vdc 6. coil power .20 = .20w .36 = .36w .45 = .45w
page 1 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. j102 bottom views schematics & pc layouts j102 10.16 [.40] 2.54 [.10] 7.62 [.30] (6x) ? 1.00 [.04] 1a 1b 1c j102k 7.62 [.30] 10.16 [.40] 2.54 [.10] (5x) ? 1.00 [.04] 1a 1b 1c
|
